loading up
- Thread starter pricetc3
- Start date
well if i pull it and pop it it will start but it is like theres tons of fuel and i have to feather the throttle for a min to get it to run normal if i give it to much it will baug down untill i give it less throttle and it will stay running but it is like it cuts out then comes back i read a thread on here and some one had the same type of prob and it said to change the coil and my airscrew was if i turn it all the way right it was 1 turn so i put it at 1.5 but i couldnt get it to start by kicking it so i left it alone for now
no i havnt i need to check a few things what psi should it have its totaly stock i need to check the reeds and everything i guess usualy after i get it started and ride i dont have a prob starting it again after it sits over night i cant get it started
sounds like its just flooding really bad. i think that is what you mean by loading up. what size jet is in it? is it stock?
if it's stock wip out that service manual and check the carb specs and settings over while your doing your other checks, seems to be a good place to look for "loading up" issue's, carb pukin fuel? float/needle/seat stuck open?
i cleaned the carb and it didnt help still having starting issues and i guess it cant be the coil unless they weakin after a while any other ideas would be appreciated thanks and im going to check the compression tommorow oh when it warmed up i dont have any probs with it just after it sits for a few min and cools down
Similar threads
