im lookin to put underglow and front lights on my blaster. green lights that are pretty small but bright on a 98 blaster with no lights and how would i hook this upp. this is my street roller the banshee is for the dirt
lights and underglow
- Thread starter blasters/banshees
- Start date
first why would u wanna do that unless its for show second u would probably have to put in a batter for that
o ok they yea u would have to put in a batter unless the under glow is 6v and the front lights r 6v cause a blaster only produces 12 v
you dont need a battery but the lights wont work unless the quad is running..you can just hook it to the headlight wires like run light on low beam and glow lights on high beam..
thats what i would do..
thats what i would do..
its not voltage that changes, it will remain 12 (voltage fluctuates with rpm).
Think of the voltage as a 5 gallon bucket, inside the bucket you have watts (55) for the sake of simplicty here we will say watts and amps are the same thing..they are not watts/volts=amps so a blaster can push 55 watts at 12 volts = aprox 4.5 amps..anyways before I confuse you..
the 5 gallon bucket is the voltage, inside it you have watts or amps, the headlight takes so many watts out of the bucket, the taillight takes so many watts out of the bucket.. you can only take 55 watts out of the bucket and then it's empty. if you try and take more watts out than the bucket holds..like running 80 watts of lights, the bucket can only give 55, but the bucket realizes you are trying to take extra, this upsets the bucket and the bucket gets hot. if you get the bucket to hot to many times it melts, ten it has a hole, and cant provide any watts and you have to buy a new stator because you melted the old one
ohhhhhh well nice i learned sumthin new today thanks dude "cause knowledge is power!!!!" I:I
anyone come on no won noes how to hook up led's and use them as lights and underglow how do you split the wire will it have enogh power to it
http://www.blasterforum.com/showthread.php?t=6686
here the how to,
check that section out theres loads of useful stuff there
here the how to,
check that section out theres loads of useful stuff there
Last edited by a moderator:
so I could hook the led's to the front and use them as lights and rear light put underneth the engine and make it underglow(neon) with just useing the headlight wires and tale light wires
like i said before you can just use the wires for your headlight highbeam or tail light whatever you choose..
wire them into the spark plug it quite easy one end is positive and 1 is negatve not sure which is which though
so your saying I can have front lights like low beam and use the brake light thats only on highbeam or visa versa
Similar threads
