length of clutch pushrod

[96blaster_200]

after i assembled the engine i accidentally put that push rod:

in the long guide bar of the gears.:">
after i closed the cases and all the bolts i noticed that something is missing :">
now i need the push rod can any one measure the length of it?
I'm going to make one because i'm not planing on opening the cases again

 

[blasterfreek30]

there is suppossed to be two of them, u need the ball bearing that goes in between them

 

[blaster99]

i substituted a bb for mine,just make sure it is copper coated noto copper,and i dont under stand what ur saying

 

[pittboss45]

All of those pcs in there are made of harder steel for the wear factor. Unless you have access to this material, spent the money and get the right parts. We stock these parts and please do not use a BB.

 

[daniel3877]

All of those pcs in there are made of harder steel for the wear factor. Unless you have access to this material, spent the money and get the right parts. We stock these parts and please do not use a BB.

EXACTLY !!!! dont not, i repeat, do not try and save money and rig up internal engine parts , you will be destined for failure !!!! when installing push rod, dont forget shim/washer behind clutch basket and dont forget to put in the ball bearing.

 

[blaster99]

i used a bb ONLY I REPEAT ONLY to get me around the yard to move it

 

[daniel3877]

lmao...whatever bro...96 blaster...dont use copper. the only way to repair your engine is to do it right..