lasers

[1995blaster]

has anyone ever made one of those lasers that can catch a match on fire? i need help to make one i think there bad ass lol
im assuming u get the diode and aixiz module from ebay? and is that all you need? comin guys help me out

 

[AcidRayn]

THE one i made, i took the diode out of a cd burner, used a mini mag light
for the case, 2 batteries and one resitor, i think it was 420 ohms if i remember correct.
here is a video, he doesnt use resistor thou.

Laser Flashlight Hack!!

good luck, and make sure to look into it to make sure it works.

 

[Awk08]

good luck, and make sure to look into it to make sure it works.

dude, he's liable to beleive you and do that !!!!!!~ hahahahaaaaaa


do not look into bro

 

[JonS]

haha, remember burning insects with a magnifying glass when you were a kid? this takes it to another level lol. i'd totally have fun with this.

 

[AcidRayn]

dude, he's liable to beleive you and do that !!!!!!~ hahahahaaaaaa


do not look into bro

Then he's a dumbass an I just saved the world

haha, remember burning insects with a magnifying glass when you were a kid? this takes it to another level lol. i'd totally have fun with this.

I had to take it away from my boys. First they lit the back 40 on fire
Then they were burning each other with it. And they will burn skin.
It's is serious weapon. Funn thou :0

 

[1995blaster]

Thread resurrection, well I wanna make one again since I never ended up doing it way back when I posted this thread. What all do you need? And I understand this can burn things up close but can I still shine things far away, I know I probably shouldn't say this online but I ding dong ditch with a laser and shine it at people walking down the road and air horn them etc... And I dint want it to burn them. Think I should just play around with this one and shine people with a regular one?

What do you think price wise total will it run me?

 

[vspec]

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Comes with everything you need to build the laser, even comes with the driver board so you can run the laser without burning it out.

This kit is a bit advanced so decent soldering skills are needed and i suggest putting a small heatsink on the driver board.

 

[1995blaster]

$30 bucks dang I was hoping to stay under 20

 

[Paulie B]

I have a bunch of those things- nerd :-[
Both will blind you before you can shut your eye- permanently.
NEVER LOOK INTO A LASER!!!!

This one is 185mw 532nm greenie that will burn matches.
I built it into a box with a speaker voice coil hooked up to a mirror.



This one is 260+mw 650nm red

 

[blasterdemon7]

Then he's a dumbass an I just saved the world




I agree. Get rid of warning labels so we can weed out the stupid people and advance the human race.