Hey guys I was putting my new la sleeve cylinder on the block today and once I place it on there i realized there is no way that I can use the case breather nipple coming out of the bottom end. Are you guys capping this off with something and if so what or how do you go about using it if you are doing that, I dont want to leave it open for water/dirt to get into my bottom end.....
LA SLeeve Big Bore Kit
- Thread starter younggun650r
- Start date
bronco had this problem and i think others talk to him about it and dont cap off the breather for the cases thats there for a reason
I did not find the 90* adapter until after i had this problem and i dont remember were i found it. But i used a die grinder with a very small end to grind some off of the bottom of the cylinder under the reed cage and some off the top of the nipple. but first i plugged the breather nipple with greese so shavings would not get in and i was not trying to grind the top off of the nipple but its so tight it accidentaly happened
Attachments
so does some place make a 90 degree adapter for the nipple?, I guess as a last resort I could cut into the cylinder but I really dont want to haha
I think the blaster CASE BREATHER FITTING is a press in fit but dont know what size the case end is, but if someone knows the size it is we can probably find one...
The banshees case berather fitting is 90*, will that fit?????? LOOK IT'S #6 Genuine OEM Parts :: CRANKCASE Parts for YAMAHA BANSHEE 2000
The banshees case berather fitting is 90*, will that fit?????? LOOK IT'S #6 Genuine OEM Parts :: CRANKCASE Parts for YAMAHA BANSHEE 2000
Called LA sleeve and they forgot to mill some of the intake port, they said they would pay to ship it and sent it back but I just had my local shop do it for 10 bucks, normally you dont have to worry about this though they just forgot to do it on mine....
