L()T'S O'' PARTS WHOLE QAUD AND LOTS MORE

[blastermaster85]

OK BLASTER HEADS IM PARTING OUT MY TRAIL BLASTER MANY PARTS GOING TO LIST MOST BUT I HAVE EVERTHING ONE MIGHT NEED AND MORE JUST PM ME ; OR POST HERE ILL TRY TO GET BACK AS SOON AS I CAN WITH AWSERS TO ANY ?????????S THINK ITS A 99 BUT NOT SURE I CAN GET VIN IF NEEDED THE FRAME IS MOSTLY STRIPPED OF PAINT SO JUST NEEDS SOME SANDING AND ITS READY TO PAINT OR POWDER COATED WILL POST SOME PRICES THAT ARE FIRM BUT SOME JUST SHOOT ME A GOOD OFFER AND ITS YOURS
OH YEA #%#%#THE MOTOR IS NOT FOR SALE *^^&%#@#
TRADES OK IF WORT IT ILL TAKE COOL STUFF FOR MY DRAG BLASTER OK HERES MOST BUT OT ALLI:IB-):-D=)):">

 

[mddyatv]

I am looking for a carb.

 

[blastermaster85]

HERES MOST OF THE STUFF NONE OF THESE ITEMS INCLUDE SHIPPING


FULL SET OF ITP MUD LITES WITH ITP BAJA FRONT RIMS AND ITP ALUMINUM REARS ALL BOUGHT BRAND NEW BY ME 90%TRED LEFT LIKE NEW $$ 250 $$

HOLE SHOT REARS ON AFTERMARKET ALUMINUM RIMS 70 % TRED LEFT GOOD CON $$ 90 $$

2 SETS OF PLASTICS ONE BLUE ONE WHITE SPAY PAINTED BLACK AS SHOWN IN PIC BLUE ONES HAVE MAIER CUSTON FRONT FENDERS OTHER ONES STOCK MAKE A OFFER WILL SELL BLUE AS WHOLE AND OTHER IN PIECES IF NEEDED

GOOD FRAME STRIPPED OF MOST THE PAINT NEEDS TO BE SANDED AND READY TO BE PAINTED OR POWDERCOATED $$150$$

REAR SKID PLATE $$35$$
REAR GRAB BAR $$30$$
BOTTOM SKID PLATE $$40$$
BLING STAR BUMPER $$45$$
FRAMe PROTECTORS $$20$$
PRO TAPER BARS LIKE NEW $$45$$ WITH GRIPS LIKE NEW
THUMB TROTTLE ,NEW CABLE,STOCK CARB [TORS REMOVED ] ,REED CAGE STOCK WITH NEW STOCK PEDELS/REEDS $$110$$ OR B/O

boysen reed cage boysen reeds $$50$$with 34/35mm carb adapter$$55$$ 34/35mm carb not sure i think it 35 will post pics with cable $$90$$

YAMAHA YFZ 450 FRONT SHOCKS $$200$$

WHEEL HUBS $$25$$

stock axel $$40$$ or B/O

PRO CIRCIUT PIPE AND SILENCER $$175$$ OR B/O

STOCK STEARING STEM $$45$$

REAR END [TOGETHER] SWING ARM ,AXEL,AXEL CARRIER,WHEEL HUBS,SPROCKET,SPROCKET HUB,BRAKE ROTOR,BRAKE ROTOR HUB,ALL NEW BEARINGS BUSHINGS $$200$$ OR B/O

FRONT HUBS A ARMS TIRE RODS KNUCKEL BRAKES [WHOLE TOGETER ] WILL POST PICS TO GET BETTER IDEA OF WHAT IM TALKING ABOUT
$$75$$ EACH SIDE OR BEST OFFER BOTH $$125$$

HEAD AND CYLINDER WITH PISTON AND RINGS WITH HOME PORT & POLISH $$100$$ OR B/O

FOOT PEGS BOTH SIDES $$50$$

FOOT GAURDS METAL ONES THAT CONNECT TO FOOT PEGS $$25$$ ASET I HAVE TWO SETS

AIR BOX LID WITH HARD WARE $$12$$

UPPER A ARMS AND LOWER A ARMS $$25$$ A SET

CLUTCH LEVER AFTER MARKET $$15$$

AFTER MARKET BRAKE LEVER $$15$$

SWING ARM $$40$$

STOCK BRAKE LEVER $$10$$

SPROCKET HUB WITH SPROCKET $$20$$

REAR BRAKE ROTOR $$15$$

FRONT BRAKE LINES $$25$$

BUNCH OF TIRES JUST ASK ME IF YA NEED SOME AND RIMS TO AND LOTS OF MIS STUFF LIKE TIRE RODS HARD WARE WIRING THINGS CPUS TORS BOXS JUST ALL RANDOM STUFF I:I

AND WAY MORE TO MUCH TO LIST SO IF YOU NEED SOMTHING JUST SHOOT ME A REPLY

 

[blastermaster85]

I am looking for a carb.

i have two to chooose from check em out are you looking for stock or after market ??????I:I

 

[SpeedBall]

I'm very intrested in the
"HEAD AND CYLINDER WITH PISTON AND RINGS WITH HOME PORT & POLISH $$100$$ OR B/O"
did you ruin the cylinder? or was your home porting job successful?
and can I bore the cylinder without ruining the port job?
also was this the exact cylinder head rings and piston you had in your trail qaud, or some experiment gone wrong..?

 

[blaster195]

pics of pipe

 

[blaster02]

what kind of tires do you have and how used are they? I need 20x11.00-8 rear tires for mine, how much for them?

 

[Hairyblackdude]

$50 for stock foot pegs? You can get em on ebay for half that.

$10 for a stock brake lever? You can buy brand new ones for less than that at the store..

I would rethink alot of your pricing if you actually expect to sell this stuff... Just a friendly suggestion.

 

[blastermaster85]

I'm very intrested in the
"HEAD AND CYLINDER WITH PISTON AND RINGS WITH HOME PORT & POLISH $$100$$ OR B/O"
did you ruin the cylinder? or was your home porting job successful?
and can I bore the cylinder without ruining the port job?
also was this the exact cylinder head rings and piston you had in your trail qaud, or some experiment gone wrong..?

its the one that came with the blaster that i bought to re build im geetin a 240 kit and its no longer needed i didnt do the port and polish the kids dad that i got it from did but the qaud stared right up first kick when i got it drove it in my parking lot for like 20 a few wheelies then took the whole bike apart and its been sitting since the piston and rings are the ones that came with it and are fine no need to bore I:I

 

[blastermaster85]

$50 for stock foot pegs? You can get em on ebay for half that.

$10 for a stock brake lever? You can buy brand new ones for less than that at the store..

I would rethink alot of your pricing if you actually expect to sell this stuff... Just a friendly suggestion.

why would you be such an ass you can go and bid on them then dick

frendliy suggestion my ass my prices are good where there at

 

[blastermaster85]

what kind of tires do you have and how used are they? I need 20x11.00-8 rear tires for mine, how much for them?

pm sent

 

[chris61988kb]

im thinking about the frame, because i want to do a powder coat job and dont feel like ripping my while bike apart. also boyseen reeds and cage is a possibility, along with the cylinder and head.

i need to meet up with you for the shock and a arm this friday hopefully anyways so ill just come to your place to pick them up and i can check the rest of your stuff out while im there. Im almost positive im going to want the boyseen reed setup, as long as its in good condition im taking them.

maybe if i buy a whole bunch of stuff from ya friday you can give me a little discount, you know, gotta help your MASS boys out!

 

[blastermaster85]

im thinking about the frame, because i want to do a powder coat job and dont feel like ripping my while bike apart. also boyseen reeds and cage is a possibility, along with the cylinder and head.

i need to meet up with you for the shock and a arm this friday hopefully anyways so ill just come to your place to pick them up and i can check the rest of your stuff out while im there. Im almost positive im going to want the boyseen reed setup, as long as its in good condition im taking them.

maybe if i buy a whole bunch of stuff from ya friday you can give me a little discount, you know, gotta help your MASS boys out!

ok you got that some one is intersted in the head so let me know asapI:I

 

[chris61988kb]

pass on cylinder, and head for now. if you still have it for sale when we meetup ill check it out.

 

[blastermaster85]

cool man

 

[chris61988kb]

you have banshee hubs?

 

[blastermaster85]

na blaster hubs

 

[Stagesrt4]

cylinder and head still available

 

[blastermaster85]

yes for now your the third to ask th0

 

[bigdblaster]

can u send me pics of ur rims and tires all of them if possible lol