KINDA won a case of klotz Super TechniPlate

NEONNIGHT34609

New Member
Dec 19, 2010
2,363
12
0
FLORIDA
i know i am gonna start a war with this but how good is this stuff? local shop had a few drawings (oil and goggles) i was the winner of a set of goggles, this is where the KINDA comes in. i didn't need the CAMO goggles and the winner of the case of 2 stoke oil had no use for it since he was a 4 stroke guy. he seen that i had a blaster and offered to trade i said "HELL YAA" i will even buy you a soda and hotdog (2$ fund raiser for a good cause). i usually run 32:1 but i was told by a few of the local guys that i should run that brand of oil 40:1 does that makes any sense?
 
  • Like
Reactions: biggrobb762
Tons of people run it in here and a few hate it. Thats your decision. Oil is like underwear, we all have our own type. You can run it at 40:1 but i run mine at 32:1 anyways. I just bought another gallon of it @ 42 bux a gallon so if you decide you dont want it put it up for sale and someone will. They say beings its synthetic you can reduce the amount of oil you run but i dont to insure good lubrication and thats just my preferance.
 
I run it and love it. 32:1 is what I run and have for years.Run that stuff.Plus it smells good too.lol
 
heres my 3 month experience with klotz supertechnishit........
this was a brand new wiseco top end, with the same jetting i was, and still am running now, without this result from maxima super m
this is not fried, i took the top end off after checking my compression and finding it very low, seems it was carboned up so bad it forced the rings out and wore them prematurely.............

4790-klotz-oil.jpg
 
i handed off a few quarts to some of the young 2 stroke riders but still left with more then half my case. i think i will give it a try. if it blows up then i have a reason to stoke it
 
heres my 3 month experience with klotz supertechnishit........
this was a brand new wiseco top end, with the same jetting i was, and still am running now, without this result from maxima super m
this is not fried, i took the top end off after checking my compression and finding it very low, seems it was carboned up so bad it forced the rings out and wore them prematurely.............

4790-klotz-oil.jpg

You must of done something wrong. I don't see anyone else complaining about it.
 
i run it, smokes pretty good, but it will because its 20% benol and 80% synthetic, the benol protects better than synthetic but makes it smoke so they mixed it with synthetics instead of pure benol
 
i mixed up a batch. since i just cleaned my carb and tank i figured no better time then the present. i blasted the blaster up and down the road and though to my self WHAT THE HELL IS THAT SMELL. its a pretty unique smell
 
i mixed up a batch. since i just cleaned my carb and tank i figured no better time then the present. i blasted the blaster up and down the road and though to my self WHAT THE HELL IS THAT SMELL. its a pretty unique smell

I love the smell of klotz... unfortunately no one around here sells it so I switched to Lucas semi-synthetic and it stinks. Runs great, but smells horrible.

I ran Klotz for about 75 hours and two trips to busco and the engine still had 130 psi when it left my hands. I was VERY pleased with service I got out of Klotz and FYI, I mixed mine 32:1
 
i <3 klotz. i've tried BENOL, R50, and Supertechniplate.

all ran at 20:1 in my LT500R, pulled the jug off saturday(it has been on same bore since 1992) not excessive carbon or gummy-ness anywhere on the piston, exhaust port, head, crank, crankcase, etc.

i've put about 40 hours on the zilla since i've owned it, and all with KLOTZ. that is proof enough for me that it is great oil
 
run it!! its great oil, this year i switched from super m to benol and the results are great plus it dont smell like ass any more lol.
 
I like the smell of Klotz. I havent decided what Im going to run when Im out of Yamalube. I run Yamalube 2R and from everything Ive read, you cant go wrong with the stuff. So I dunno.