Kill switch

[Markblaster]

Hi. I'm going to be removing the head light as I have a Maier race front fender for the front and was wanting to do away with the headlight switch on the handle bars also.

The kill switch on the handle bars do you have to have a switch type or can it be a momentary button like this: http://www.ebay.com/itm/Fly-Racing-...ash=item4d2b79d149:g:aAAAAOSw1vlUrxun&vxp=mtr

O do you have to have one this this: http://www.ebay.com/itm/BikeMaster-...007998?hash=item35d7560ebe:g:aWYAAOxyNo9SrOJQ

Thanks

 

[Fast6hand]

I went with the second tether style. Either will work. But I like the tether so the bike will shut off if thrown off.

 

[Markblaster]

just thinking about it. if the stock kill swtich is on isnt that completing a circuit and when u turn the switch off it opens the circuit? the momentary button would leave the circuit open till you press it?

any ideas. or is it the other way round and the circuit is open when the switcb is on and when to swtich it off the circuit connects?

 

[Fast6hand]

just thinking about it. if the stock kill swtich is on isnt that completing a circuit and when u turn the switch off it opens the circuit? the momentary button would leave the circuit open till you press it?

any ideas. or is it the other way round and the circuit is open when the switcb is on and when to swtich it off the circuit connects?

The button just grounds the circuit. You would have to hold the button till the engine dies I'm assuming. I like the tether.