Whats up guys ive been lingering for years forgot member id a couple of times but im back and sharing my latest build.Little late on picks and stuff but took some today and sharing with community.
old frame had a kink in it so i replaced
project Banshee hehe.
everything has been reworked or replaced .i hav a dnyo port full exhust coming. important things are portjob,complet engine rebuild,33mm pwk with bolt on filter ,reed spacers,hydrolic brake kit from blaster zone.all new bearings,gaskets and seals everwhere,Everywhere.banshee blue lable rims , i need the banshee rear hubs for the bolt pattern,15/40 sprockets,vitos cables,scott grips,monster graphix,poly epoxy enamel primer(stuff they use on cement trucks,and three coats of car paint and clear.rewire.too much going on right now ,please give some feedback and advise,some criticism expected thanks..
old frame had a kink in it so i replaced
everything has been reworked or replaced .i hav a dnyo port full exhust coming. important things are portjob,complet engine rebuild,33mm pwk with bolt on filter ,reed spacers,hydrolic brake kit from blaster zone.all new bearings,gaskets and seals everwhere,Everywhere.banshee blue lable rims , i need the banshee rear hubs for the bolt pattern,15/40 sprockets,vitos cables,scott grips,monster graphix,poly epoxy enamel primer(stuff they use on cement trucks,and three coats of car paint and clear.rewire.too much going on right now ,please give some feedback and advise,some criticism expected thanks..
Last edited: