Jetting Question

[DirtDiggler]

Does anyone run a filter directly off the carb with a pre-wrap? What type of jetting would you need to bump up to , to keep the mixture from leaning out?

 

[samolia]

well if your blaster is stock other then the filter i would get the jets 240 250 260 and then go from there when i had my K&N in my air box i ran a 240 and it worked great but the might need a little more fuel because of the filter being directly on the carb so youll prolly end up with a 250 main in there but get a 260 just incase..

 

[DirtDiggler]

awesome bro , thanks !!!

 

[samolia]

awesome bro , thanks !!!

no problem man...I:I

 

[jpote125]

I'm confused too. So if I take off the air box lid under my seat, I will need to re-jet the carb? Which jet should I use if I take the air box off?

 

[justtwistit]

I'm confused too. So if I take off the air box lid under my seat, I will need to re-jet the carb? Which jet should I use if I take the air box off?

yes u have to rejet and it depends on ur mods on which jet u use

 

[nofxfan125]

I wouldn't suggest running the filter right off the carb. You should put a nipple in there. If you look at the diagram here it'll show you why.

http://upload.wikimedia.org/wikipedia/commons/5/52/Arbeitsweise_Zweitakt.gif