Jetting numbers...the solution

samolia

Member
Jul 13, 2008
2,048
17
75
Alger, Michigan
this could help out alot of members if this takes off.
and hopefully this will help alot of the newbies...
I:IblasterforumI:I

STOCK JETTING IS:
PILOT:32.5
MAIN:230

Please copy and paste this along with your answers in your reply, thanks.

1) what carb do you have???

2) What type of aftermarket exhaust do you have?

3) What type of airfilter do you have?

4) What kind of air box set up do you have??

5) What size pilot jets are you using?

6) What size main jets are you using?

7) What needle position?
 
Last edited:
Re: What Main jets are you using????

ok im first haha. this is when i owned a blaster

1) what carb do you have??? stock

2) What type of aftermarket exhaust do you have? stock exhaust

3) What type of airfilter do you have? K&N with prefilter

4) What kind of air box set up do you have?? no lid

5) What size pilot jets are you using? 32.5

6) What size main jets are you using? 240

7) What needle postion? middle slot (stock setting)
 
Last edited:
1) what carb do you have???stock

2) What type of aftermarket exhaust do you have?full dg

3) What type of airfilter do you have?twin air foam filter

4) What kind of air box set up do you have?? standard

5) What size pilot jets are you using? 32.5

6) What size main jets are you using? 240




this is a very good idea. hopefully it will help some people and stop all the questions
 
1) what carb do you have??? Stock.

2) What type of aftermarket exhaust do you have? Stock header,project blaster silencer.

3) What type of airfilter do you have? Stock.

4) What kind of air box set up do you have?? Stock with no lid.

5) What size pilot jets are you using? Stock.

6) What size main jets are you using? 270.
 
  • Like
Reactions: jp56
1) what carb do you have??? stock

2) What type of aftermarket exhaust do you have?stock

3) What type of airfilter do you have? pod filter

4) What kind of air box set up do you have?? none

5) What size pilot jets are you using? 30

6) What size main jets are you using? 240 but needs 230

7) What needle slot? the top slot
 
1) what carb do you have??? Stock.

2) What type of aftermarket exhaust do you have? Stock header,project blaster silencer.

3) What type of airfilter do you have? Stock.

4) What kind of air box set up do you have?? Stock with no lid.

5) What size pilot jets are you using? Stock.

6) What size main jets are you using? 270.

your not bogging with that 270? and where is your needle at?
 
this could help out alot of members if this takes off.
and hopefully this will help alot of the newbies...
I:IblasterforumI:I

STOCK JETTING IS:
PILOT:32.5
MAIN:230

Please copy and paste this along with your answers in your reply, thanks.

1) what carb do you have???

2) What type of aftermarket exhaust do you have?

3) What type of airfilter do you have?

4) What kind of air box set up do you have??

5) What size pilot jets are you using?

6) What size main jets are you using?

what needle slot? should be added
 
) what carb do you have???
stock

2) What type of aftermarket exhaust do you have?

fmf sh*tty I meen fatty

3) What type of airfilter do you have?

foam

4) What kind of air box set up do you have??

stock, no lid

5) What size pilot jets are you using?

stock

6) What size main jets are you using?

270

7) What needle position?

3rd

Just a bit rich on the clip.
 
1) what carb do you have??? stock

2) What type of aftermarket exhaust do you have? stock

3) What type of airfilter do you have? K&N with precharger

4) What kind of air box set up do you have?? lid on

5) What size pilot jets are you using? stock

6) What size main jets are you using? 230 (stock)

7) What needle position? leanest needle position with oil injection


For years 1988-1989 stock main is a 220 and for 1990-ON is a 230.

And for the needle position, stock is slot #2 , #1 would be the leanest and #5 would the richest.

Thats right from the manual page 225.
 
1) what carb do you have??? stock

2) What type of aftermarket exhaust do you have? stock

3) What type of airfilter do you have? K&N with precharger

4) What kind of air box set up do you have?? lid on

5) What size pilot jets are you using? stock

6) What size main jets are you using? 230 (stock)

7) What needle position? leanest needle position with oil injection


For years 1988-1989 stock main is a 220 and for 1990-ON is a 230.

And for the needle position, stock is slot #2 , #1 would be the leanest and #5 would the richest.

Thats right from the manual page 225.

u should go ahead and get you a 240 or 250 jet for that pro circut coming to you
 
1) what carb do you have??? Stock

2) What type of aftermarket exhaust do you have? Full FMF

3) What type of airfilter do you have? K&N

4) What kind of air box set up do you have?? Lid Removed

5) What size pilot jets are you using? Stock

6) What size main jets are you using? 270

7) What needle position? Stock