Jetting And Autolube help

carl

New Member
Oct 10, 2009
316
2
0
South, Uk
Hi, i am going to be ordering proberly a 260/270 main jet tonight. What i need to know is will i need to adjust the auto lube for more oil if that is possible?
The last thing i want to do is deprive my engine of oil.

cheers carl
 
Ah okay cheers for that i just thought if the engine was getting more fuel it would also need more oil so that the mix was right
No if you pack for air/ fuel into the engine you do need to re-jet, but not go richer in the oil mix.

Imo remove the pump and pre-mix, thats the safest way to get a constant suppy of oil. too many pumps have failed cuasing the engine to fry.
 
I heard somewhere that when you change the jetting that this is where your oilpump "fails" not mechanically, but becuz sense there will be more fuel going into the motor the ratio will get f*cked up which means you wil run leaner on oil, so best remove it.
 
No if you pack for air/ fuel into the engine you do need to re-jet, but not go richer in the oil mix.

Imo remove the pump and pre-mix, thats the safest way to get a constant suppy of oil. too many pumps have failed cuasing the engine to fry.

Thanks for that i was considering on moving the oil pump system ut i am planning on making the blaster road legal and it would be a right pain in the back side on measuring oil out in a petrol station
 
Thanks for that i was considering on moving the oil pump system ut i am planning on making the blaster road legal and it would be a right pain in the back side on measuring oil out in a petrol station

just keep the small oil containers like the little 8oz or 4oz container in your airbox compartment and put 4 oz to a gal at the pump..