jb weld ftw!!!

4cfed

Member
Jan 5, 2009
8,107
82
84
fond du lac wi
www.airfoolers.com
sooo when you keep breakin cente rlower motor mount on your car, and the 3m window weld filled front is still moving( window weld is a 1 part epoxy that drys to a harder rubber)


you fill the whole front motor mount with jb weld!!!


IMG00017-20110615-2142.jpg




iv ripped two cente rlower mounts i half on my mazda in the last 2 weeks i had the front filled with window weld but it still moved SOOO its now filled with jb weld, and curing on the kitchen counter ( my wife may beat me wehn she gets home) and when i get the new center lower im gonna drill 2 holes threw it and run two grade 8 bolts threw it to keep it from breaking in half again, and the shifter support brace mount is gettin bolted directly to the floor!!


if my motor moves at all and or brakes another mount i shall deem it cursed and sell it to the gypsys!!
 
had solid motor and tranny mounts on my s10 man it was hard to drive cause everytime you went to pull off at all it would chirp spin the tires just a hair every damn time lol.
 
i used it to fill a front motor mount on a modded 89 daytona cs turbo running 22 psi ( stock was 7 psi :) ) and it held just fine.. im hopin this one holds as well.. seein the mazda makes less power by far