Hub Help Please

[Ol DirtyBlaster]

Just cant figure out what kind of hub this is/ from:-/, any guesses??
sorry for the bad pic oh and this is off my 2000 blaster rear axle

 

[yb200]

that was on the rear axle???? lmao

 

[fioz600r]

isnt that a front hub?

 

[mr_3_0_5]

its a front hub to something.

 

[Ol DirtyBlaster]

that was on the rear axle???? lmao

didn't answer the question what is it?

and no its not the front blaster hub

and the problem is i cant get the stupid thing off

 

[yb200]

you are making no sense

 

[Ol DirtyBlaster]

you are making no sense

??? all i want to know is what hub it is because i cant get it off. and you laughed like you knew what it was. if you know please tell

 

[mr_3_0_5]

take a better picture so we can come up with a solution..

 

[yb200]

take the nut off the ceneter and pull it off

 

[mr_3_0_5]

take the nut off the ceneter and pull it off

+1 if it dont slide off.. beat it with a sledge till it comes off..

 

[Ol DirtyBlaster]

that pic is from the other side. this pic is the one ive been trying to get off. ive tried pullers,hammers, heat everything. here is a side view i had

 

[fioz600r]

Yup do what those to guys said and you could soak it with some WD40 or some other penatrating oil.I see alot of guys use PB Blaster But I never heard of that

 

[mr_3_0_5]

well if its that stuck that you cant get it off..
cut the axle.

 

[yb200]

wow thats wierd

 

[Ol DirtyBlaster]

Yup do what those to guys said and you could soak it with some WD40 or some other penatrating oil.I see alot of guys use PB Blaster But I never heard of that

ya ive tried everything under the sun, and the funny thing is it doesnt even budge so weird, final solution im going to use a press

 

[blasterdude14]

i wish i had a clue as to what the hell that is to help but im clueless

 

[fioz600r]

can oyu notice if maybe it was welded on?

 

[mr_3_0_5]

if its that jammed on the splines are probably shot..

 

[Ol DirtyBlaster]

can oyu notice if maybe it was welded on?

you would think its welded on trying to get it off but no signs of being welded.

 

[blasterfreek30]

double check to make sure its not welded on.....kinda looks like a homemade hub