How to get Drain bolt off.

[2004 YFS200]

I need to know how to get the drain bolt off cause mine is on there pretty dam tight ive tried everything sockets, vise grips, pliers and i just can get it off and i dont want to strip it cause everything i try to get off on my quad usually strips and this is one thing i dont want 2 strip cause i cant drill it out or anything.

 

[blasterjarred]

lol i have the same problem but myns striped now

 

[djack12]

ill anwser this question again. tip you blaster on its ass(leaning on the grab bar) fine a socket that is slightly smaller then the nut. pound it on there with a hammer. next get a welder and weld the lip of the nut to the socket. make sure you use a crap socket cause your never gonna use it again. that should get it out. thats how i got mine out and fabb_3s. i wish i had pics, but i dont.

 

[Blasterb0y794]

or you can just use some muscle and some wd-40 =D

 

[blaster195]

wd40 is for bitches use that muscle lol jus playing wd40 and some strength you should have it

 

[igotacracker]

brute force, mine was a biotch too

 

[blaster 0108]

i had same problem i used vise grips around the edge of the bolt worked great like they said tilt the quad up

 

[quam]

you def gotta get the quad on it's ass.
what i did was just cut the head off it w/ a dremel. then i replaced it.

 

[blasterboy91]

im a pussy and cheated the hard work...i use are air compresor for everything on the quads now...

 

[2004 YFS200]

looks like ill try the vise grips again and put her on her ass cause i ant got no welder

 

[CC&Fabb]

you dont need a welder...all you need to do is get a smaller socket then the bolt, pound it on there and torque if off.

I use an impact gun now too. Much faster than doing it by hand.

 

[cirame1]

make sure ur going the rite way to. 1 time i was trying to pull it off the other way actually tighten it and almost stripped it out.

 

[2004 YFS200]

lol i would prob turn it the wrong way cause im retarded