help whit stud

[gallonegro]

i no have studs for the front of my blaster. What I can use to replace the stud or i need to buy anyway the studs.:-/

 

[scotj77]

might be able to find the studs at ace hardware just take a hub with ya.

 

[00blaster200]

Studs need to be pressed in. You can either get bolts that fit through the holes or just buy new hubs.

 

[mac2mac]

I seen them in pep boys.. I'm not 100% if they have the right size but they have alot.. You can hammer them in a little just to get started then you should be able to tighten them in with a wrench... Use some washers instead of the rim to get them in all the way

 

[gallonegro]

thanks guys i go tomorrow to a local store to check something to fit in the hubs

 

[NEONNIGHT34609]

studs come right out with a hammer. When putting them in use a stack of 3-4 greased washers on the stud and run the nut down. the greased washers will turn with the nut and you wont PUCK ANYTHING UP.