yes i took the thumb throttle apart b/c it wasn't even letting me give it gas.....whats a slider? and what do you mean unplug near the handle bar? do you want me to post pics of what i got now?
Happy Now?
- Thread starter 97blasterguy
- Start date
yeah sounds like the round thing that is under the carb cap isn't aligned properly. there is a notch on the inside of the carb and a slot on the barrle shaped thing inside the carb. I am assuming that there is a spring between the cap and the barrle shaped thing. also the big needle thing under the barrle thing needs to go into the hole at the base of the opening( a brass colored hole inside the carb). hope these terms are something you can understand bc you don't know all the real names yet. don't worry stick around here for a while and you will sound like a seasoned vet in afew months
ok i'm about to post pics.....but here when i do stick the needle in that hole is the black piece supposed to go down there with it or stop?......and I found out whats wrong with the throttle whenever we put the spring in and tighten up and then try to give it throttle it want come back out.....it sticks there because the spring cant go back out.
thats because you don't have the notch in the carb lined up with the grove in the side of the barrle thing
ok so the knotch is the only problem? i got the spring and barrel thing in their all the way tho
every thing looks good there. does everything work right when it is apart? if so you don't have it lined up right it can be very difficult to do sometimes especially since you have never done it before. the long notch all the way down the side of the barrle has to line up with the small metal nub sticking out of the inside wall of the carb. is the nub verticle it is a thin elongated oval shape
yes everything is as you have said but i am just gone give up and take it to a shop.....i have been working since 7 this morning on it......and i'm tired
everything is as is....i have been up working on it since 7 .... i'm just goinog to take it to a mechanic.
yes....my backs killing me from working on it os much yesterday but i really want this thing working.
thats what I was getting at too but this guy is getting impatient. bad thing to do with a two stroke it takes lots of patients sometimes. I think the alignment lug in the carb is probably twisted a bit and that is why the slide won't go down or he has never gotten the needle and the slide lined up right at the same time. been there done that it sucks figuring it out for the first time.
Similar threads
