got a new ride

[blaster8wg]

i traded one of my blasters for a raptor 660 with an hmf pipe but doesnt run. i know it needs a battery so we hooked it up to a charger and tried to start it. it turns over but nothing happens we are going to get it bored over and get new piston and rings and see what happens... it also needs a lot of other work, like plastic, axle bearings, rims n tires, and more. so now we have two blasters a bombardier ds50, a banshee, and da raptor

 

[Awk08]

i wouldnt jump to conclusions on the bore job, check your compression first, check for spark,air filter, clean carb........

 

[blaster8wg]

well when we got it everything was loose and didnt a filter on it. we checked to see if it had compression and it seemed like it but we are going to have to look at it some more

 

[IHATEU]

check the valve clearence they have to be adjusted every once and a while, the valves could even be stuck open a little bit making you lose compression and making it very hard to start.

heres a link to a how to: http://raptor.popolz.com/adjust.html

 

[blaster8wg]

ok thanks... 15 characters

 

[IHATEU]

oh and what year is it?

 

[IHATEU]

did you get anywhere with it yet?

 

[coreyownz]

check the stator.. might not be geting spark get a voltage tester and go nuts..