G-Force front rims black

Status
Not open for further replies.

goodman24x

Member
May 2, 2010
473
9
54
West Central Florida
Like it says. These are from Rocky Mountain Atv. They cost me $50 each. We ran them for about 8 races. Then I bought some 4/1 offset hipers because the rail the turns better.
These are 3/2 offset with 4/156 pattern.
I believe that fits all yamaha and some Polaris.
They have rolled lip, no dents and guaranteed not bent.
The outer lips have some scuffs but could be easily covered with some black spray. I left them the way they are to give a true pic.
$75 shipped in the USA.
34fb8t5.jpg

2ilf136.jpg
 
Last edited:
It's ok you didn't break my deal. Your link is for the cheap GP wheels. They do not have the rolled lip or the wheel stud steel inserts. Those cheaper all aluminum stud holes will egg out in MX or XC competition. The wheels I have are the original XC versions. Thicker aluminum and rolled lip with the steel wheel stud inserts that require acorn lug nuts that keep wheel centered perfectly. Also the center hub area of the wheel is triple layered aluminum, about 3/8" thick, much thicker than the cheaper GP and newer XC1 wheels they are selling.
Here is my wheel link.
G-Force XC Aluminum Wheel | ATV | Rocky Mountain ATV/MC
 
i ran those g-force xc's on the back of my blaster for 2 seasons when i had the 10" bandit tire.
they're the toughest aluminum rim made !
 
Status
Not open for further replies.