G Force axles??

[4cfed]

im pretty sure thats what my axle is ( the one that came on the wifes blaster).. it has collars that sit behind the hubs to add/remove lenght from the axle.. moves the hubs in or out... anyway..

its gotta wierd locking nuit set up on it... ill try to explain it sinc eits to dark to get agood picture right now..
loosen the big nut.. and its slides to the right but it rides on a threader collar inside of it.. when you turn it to the left ( losen) the big nut moves over to the right and exposes a big 'c clip' you pop that clip out and than you can slide the nut/ collar set up off to take the axle out..
Well.. idk if mine is missing washers or what up it wont fully tighten up, still about 1/2 if side to side play in it.... am i doing something wrong?? or am i missing a spacer or two?

 

[visipe]

u didnt have any washers at all then yeh u probably are ... are ur seals in there ? aswell

 

[4cfed]

i used everything for the axle off the wifes blaster.. what was on hers is what i put on mine... and i never thought to see if it was tight on hers.... yes everything is in my carrier... i think im missing a washer or something that should be between the nut and the carrier

 

[visipe]

i mean yeh it couldnt be anything else unless something with the 2 main bolts but no i doubt it

 

[4cfed]

hmm... ill have to hit the hardware store tommrow and see if i can get some washers to fit

 

[visipe]

im sure u can find some and they will be cheap but yeah get these washers or ur bearing will get screwed up

 

[4cfed]

i know.. dont have more thna 4-5 min of riding on it sinc ei put the axle in

 

[visipe]

while we are talking here, i kno u been around for a while so i got a question for u. Do u think this is worth it http://cgi.ebay.com/ebaymotors/_ATV...c0.m245&_trkparms=72:1171|65:12|39:1|240:1318


i duno if i should get it it seems nice better that buying 600 dollar a arms and also would u be able to get the yfz 450 shocks in there after and not get problems with ur bearings or wtv

 

[Blaster_Kart]

I know this is an older thread, but you could be missing the spacer on the brake hub side of the axle. It slides over the axle and provides a sealing surface for the carrier seal as well as spacing to keep the brake rotor hub from eating the carrier.

 

[jeff1005]

I had to buy an extra washer for the brake hub side.I put it right after the bearing carrier and it fits perfectly now.And as for Gforce not being a good axle,I have no complaints so far.I have jumped 20-25 foot jumps so far with that and the extended swinger and they seem to be holding up really good.