front rims

[biggrobb762]

does anyone know if its possible to reverse the front rims on a 94 blaster to widen the front a lil bit

 

[B-1]

Yes u can reverse the rims. Lots of people do it

 

[biggrobb762]

will the valve stem be in the way

 

[B-1]

Not on your model. only 03-06

 

[biggrobb762]

cool thanks 4 the info

 

[user1]

if i were to buy aftermarket rims what offset would be closest to that of filpped stock rims?

 

[biggrobb762]

i was looking at douglas or itp rims that have 3.5+2 ofset

 

[Blasterr525]

yes they will offste your quad meaning a wider stance

 

[sheeblast]

most rims a 10x5 in the front. so 3+2 offset is the common one. you could get a 4+1 which would be wide.

 

[DirtDiggler]

if you ever upgrade to front hydraulic brakes then yes the stem will be in the way , you can however get short stems installed and they will be fine .

 

[York Racing]

My advice is get the widest rims you can. That will save you huge money in the long run. Do you have any prices on the 4+1 offsets?

 

[20 gauge]

if you ever upgrade to front hydraulic brakes then yes the stem will be in the way , you can however get short stems installed and they will be fine .

I had to weld the valve stem hole up and drill new holes on the otherside of the rim on my '04 . only about a 1/2 " on room between the caliper and rim. Wouldn't a 4+1 rim be 4" on the inside making it narrower?