Front Hydros.

[Motocrossguy17]

Hi guys i got front hydros ordered last week and received them today. i am missing the rotor guards and the bolts that hold the calipers in place. im wondering if someone can point me in the direction to get the bolts for the caliper to be bolted on? i have emailed the guy to ask about the rotor guards as he had them in his picture but i didn't receive them.

 

[Awk08]

i don't run the rotor gaurds on either of my set-ups with no problem
and think i remember the caliper to bracket bolts as being m8 x 1.25 x 15mm
they have to be the exact length to not interfere with the rotor bolts

here's some bolt specs, but missing lengths........

http://www.blasterforum.com/engine-13/bolt-specs-46155/

 

[Motocrossguy17]

i don't run the rotor gaurds on either of my set-ups with no problem
and think i remember the caliper to bracket bolts as being m8 x 1.25 x 15mm
they have to be the exact length to not interfere with the rotor bolts

here's some bolt specs, but missing lengths........

http://www.blasterforum.com/engine-13/bolt-specs-46155/

Thanks Awk! just a pissed off as the guy said in listing that its ready to bolt on and i asked if it came with the bolts to do it and he said yes everything is included. would i be able just to get any bolt out my local hardware store as long as there that length? thanks

 

[Motocrossguy17]

would these do? Demon Tweeks High Tensile Cap Head Bolt M8x1.25 Thread 15mm Long | eBay

 

[Awk08]

i think i'd stick with a hex head bolt as originally used, those allen cap heads may interfere with something ??
try 1- 15mm to be sure it fits, or measure, before you buy all 4 needed

 

[Myblasterisblue]

If you absolutely want to run the guards I have some you can have

 

[Motocrossguy17]

If you absolutely want to run the guards I have some you can have

hi mate i amn't too bothered about the guards its mostly the bolts so i can get them fitted lol but thanks!

 

[dksix]

I had to buy some this weekend, my stock ones measured 14mm and i had to go up to 20mm because if the changes I made to get my a arms to works. I bought hex heads and added a flat washer since the stock ones had the washer head nut.