front brake resevoir

[B-L-A-S-T-E-R]

does the front brake reservoir have to be level??

 

[yb200]

i would think so

 

[B-L-A-S-T-E-R]

hmm, i got my new twist throttle and the cable is in the way

 

[B-L-A-S-T-E-R]

Would it hurt the cable if I kept It like this.

P.S. the bars are temporary

 

[yb200]

should be ok .

 

[B-L-A-S-T-E-R]

alright, thanks yb

 

[245stroker]

rezzy doesn't need to be level. I have mine angled down so the lever's more comfortable.

 

[R2F]

+1 on not level as long as your not bleeding the system. And that throttle cable may bind after a while of use. I wouldn't run it like that but it's just my 2 cents.

 

[DirtDiggler]

to keep my rezzi level I just rotated the twist throttle up to clear the rezzi , also i can remove the rezzi cap and refill/check as needed

 

[2kuik4muharemovic]

im kinda confused. why cant you just loosen the throttle assembly and twist it so the cable comes out on the bottom?

 

[R2F]

Because that will change the point of where your at full throttle. Whe you set up a twist throttle you want the throttle to top out at a comfortable position not your arm in a twisting down motion.

 

[norman420]

As long as it doesn't suck air, it could be mounted vertically. Your master cylinder is no more than a hand actuated pump with a couple of checks in it.

 

[DirtDiggler]

typically the motionpro twist throttles have a short throw to them not like a stock twist , so the position isn't a huge deal