I have an 2003 Yamaha Blaster for sale.
The blown motor is included.
No title.
Whats missing: chain, swing arm bolt (copper pipe in place of it), front bumper, rear grab bar, and clutch/brake levers. ASV levers not included in sale.
The headlight is there, just not pictured. Have a milk crate with the engine in it (harness, carb, etc.) The cylinder is off, not sure what bore it is on, as its is in storage. Blaster has a Full Pro Circuit exhaust (flange too). Hydraulic brakes are intact (minus lever). Good tread on tires (Holeshoot knockoffs) and has wheel spacers (front and rear). I have a no name right bend pipe to go along with this. No flange or silencer for it, has big dings.
$550
Located in Pa. Zip is 17970 (near Pottsville). North of I-78 and south of I-80 and (exit #124 off I-81).
I travel to southern Delaware every weekend (zip 19945 Frankford, DE). If you wanna check it out and live along the way I'll be happy to show it.
It will be washed off before sale, Just uncovered it Thursday.
--------------------------------------------------------------------------------------------------
Also if interested 4 ITP T9's, Banshee/YFZ rear bolt pattern (.190)
$80 if purchased with the Blaster. $90 otherwise.
The front wheels are in better condition than the rear. Both front and rear can use a polishing, but the rears have oxidization. Front wheels do not have any bends only a minor rub on the lip. The one rear wheel has a slight bend in the lip (its very slight and I doesn't look like it effects the bead). Both rear wheels have slight lip rash. Lug holes are still round and not oval.
lug nuts not included.
Valve stems should be replaced.
Fronts:
bolt pattern 4x156
offset: 3+2
size: 10x5
Rears:
bolt pattern: 4x115
offset: 3+5.5
size: 8x8.5
The blown motor is included.
No title.
Whats missing: chain, swing arm bolt (copper pipe in place of it), front bumper, rear grab bar, and clutch/brake levers. ASV levers not included in sale.
The headlight is there, just not pictured. Have a milk crate with the engine in it (harness, carb, etc.) The cylinder is off, not sure what bore it is on, as its is in storage. Blaster has a Full Pro Circuit exhaust (flange too). Hydraulic brakes are intact (minus lever). Good tread on tires (Holeshoot knockoffs) and has wheel spacers (front and rear). I have a no name right bend pipe to go along with this. No flange or silencer for it, has big dings.
$550
Located in Pa. Zip is 17970 (near Pottsville). North of I-78 and south of I-80 and (exit #124 off I-81).
I travel to southern Delaware every weekend (zip 19945 Frankford, DE). If you wanna check it out and live along the way I'll be happy to show it.
It will be washed off before sale, Just uncovered it Thursday.
--------------------------------------------------------------------------------------------------
Also if interested 4 ITP T9's, Banshee/YFZ rear bolt pattern (.190)
$80 if purchased with the Blaster. $90 otherwise.
The front wheels are in better condition than the rear. Both front and rear can use a polishing, but the rears have oxidization. Front wheels do not have any bends only a minor rub on the lip. The one rear wheel has a slight bend in the lip (its very slight and I doesn't look like it effects the bead). Both rear wheels have slight lip rash. Lug holes are still round and not oval.
lug nuts not included.
Valve stems should be replaced.
Fronts:
bolt pattern 4x156
offset: 3+2
size: 10x5
Rears:
bolt pattern: 4x115
offset: 3+5.5
size: 8x8.5
Last edited:
