Fast Question!

[Natdog10@yahoo.com]

the bolts to take the rear wheels off are stuck and wont come off! how can i take them off?

 

[CC&Fabb]

use that liquid break loose crap, 4d-40 or get a impact gun or hope and pray you dont strip them out when you use a regualr socket

 

[timsyfz]

Make sure you use a 6 point socket to lessen the stripping chances slightly. Soaking them in wd-40 or PB blast will help, but let them soak for a few hours.

I would use a breaker bar before I attempted an impact, or if you did use an impact don't go full out on it... feather it some so you will lessen the chance of stripping it out..

 

[Natdog10@yahoo.com]

thanks, i got it though.

 

[CC&Fabb]

so you pretty much wasted me and tims time?

 

[blasterman87]

One of my blastys got a couple rear lug nuts that are stripped, this should be fun

 

[Natdog10@yahoo.com]

so you pretty much wasted me and tims time?

no because somebody else with this problem can go to this thread without starting a new thread.

 

[CC&Fabb]

I:II am just giving you a hard time!I:I It is just info for eveybody else and it's good to have people on the forum that can figgure things out on their own.

 

[blaster biotch]

when they are stripped and stud has to be replace i just notch a groove in the nut with an airchizzel and work it in the left motion. u will eith cut through but more than likely it will back off