EXHAUST LEAK.
- Thread starter akinmond
- Start date
quick fix isn't always the best fix, man. If you have some high temp threshold rubber and a couple of pipe clamps, you could quick fix it that way. Might check at the local autoparts store for some rubber hose they use for radiators...
If you want cheap, and quick they make muffler tape and places like Autozone sell it... You just wrap it around, clamp it on, and run it a while, and the heat cures it, and seals the exhaust.
That will hold you over until you get the proper coupler for it.
That will hold you over until you get the proper coupler for it.
ever tried removing that crap when don't need it anymore? It takes like 1/2 a bottle of carb cleaner to disolve it all! :">
HAHA I can't say I ever had the need to remove that crap... If I ever used it the reason was to hold me over until I could fix it properly IE removing the bad exhaust, and replacing it.
haha what i did was i took 2hose clamps and a spring, i put 1 hose clamp on the pipe side and the silencer side and used the spring to hold the pipe in the silencer to keep them to geather it may look a little getto but it works haha..
