engine lock

blkjas

New Member
Sep 2, 2012
1
0
0
I got an 02 blaster and I took all the oil out the carb and put the carb back together and started riding and in about 15 min it cut off and when I tried to kick the kick start it got very hard and then it just stopped kicking......please tell me what's wrong
 
I got an 02 blaster and I took all the oil out the carb and put the carb back together and started riding and in about 15 min it cut off and when I tried to kick the kick start it got very hard and then it just stopped kicking......please tell me what's wrong

Please re-phrase, what exactly did you do with the oil?
 
There is suppose to be oil in the carb, if you have the stock blaster, the oil injection pump, feeds the 2 cycle oil into the carb.

and then its mixed with the fuel and pulled into the carb.

Did you remove or damage the oil line ? that connects to the carb ?

Im sorry, but it does sound like the motor is locked up and you will have to do a top en rebuild. I hope that the piston did not break, the skirt of the pistons are known to break and they fall into the case and the cases usually end up cracked or broken and they will need to be repaired or replaced. if that happened.

Do you have the free manual from here downloaded ?

Also please feel free to donate a little, if you do download.

Sporty
 
ouch, i mean you could pour some 2 stroke oil into the cylinder and try to kick it over after a few minutes, you might have lucked out and just ring locked it.