DT200 Swap

[Blaster#55]

Me too!
I really want to get one and put together another blaster with the DT200 engine in it. This guy is so lucky.

Thanks guys I cant wait to get it. Money is a little tight for me right now but he said he will hold it for 3 weeks. Cant wait.

 

[justtwistit]

ur so lucky!!!!

 

[03blasteryfs03]

hey jess u gonna let me barrow it and port that beast???

 

[Blaster#55]

hey jess u gonna let me barrow it and port that beast???

Sorry man already talk to Wildcard and I am having him port it for a 3mm crank and milled head as soon as get I am sending it to him. It is going to hall ass...

 

[Blaster#55]

Hey guys,
I need some opinions on where to mount the radiator. I haven't got it yet just trying to see where it is going to go.

 

[YZ Otis]

Suppose you've already been here but a picture is better than words
Yamaha YFS200/DT200 - Yummie Yami, Upgrade The YFS; To Be The Best

 

[Blaster#55]

Suppose you've already been here but a picture is better than words
Yamaha YFS200/DT200 - Yummie Yami, Upgrade The YFS; To Be The Best

Thanksk^^ Yea I was thinking of doing that with the two atc250r radiators or maybe just a single one like this guy did.

 

[YZ Otis]

Up front radiator is ok for open country & sand but maybe not for brushy trails. Ya need to get them in some clean air but you also need to protect them. Be careful that you get the fill cap & some of the radiator above the top of the motor. Don't want an air pocket in your head/cylinder.

 

[Blaster#55]

Up front radiator is ok for open country & sand but maybe not for brushy trails. Ya need to get them in some clean air but you also need to protect them. Be careful that you get the fill cap & some of the radiator above the top of the motor. Don't want an air pocket in your head/cylinder.

Good point. Probably going with the two atc radiators on each side.

 

[Blasterdude27]

Also want to make sure you have a coolent overflow tank if you ride in hotter weather or things could get nasty quickly! Too bad you didn't start this a month or two ago I would have sold you a mojave rad and overflow tank....

 

[gonzo]

it seems that maybe we are seeing the differance between a blaster motor and different Yamaha motors, my self go with a yz a ton more power and no battery, they are getting cheap and no need to change trannies. just a thought

 

[Blaster#55]

Also want to make sure you have a coolent overflow tank if you ride in hotter weather or things could get nasty quickly! Too bad you didn't start this a month or two ago I would have sold you a mojave rad and overflow tank....

Thanks for the info^^^ Can any overflow tank work?

 

[Blasterdude27]

Thanks for the info^^^ Can any overflow tank work?

No problem. I don't see why not.

 

[Blaster#55]

Ok thanks man.............

 

[YZ Otis]

I cleaned up a Blaster oil injection tank and put back on for a radiator overflow tank. Next time we where at the dunes a fellow saw me pourin water in the oil tank. Since he had Blasters in his camp he knew I was screwin up and rushed over to save me from disaster We had a fun chat. For sure put an over flow tank on and make sure it works properly so you don't get air in the system.

 

[Blaster#55]

I cleaned up a Blaster oil injection tank and put back on for a radiator overflow tank. Next time we where at the dunes a fellow saw me pourin water in the oil tank. Since he had Blasters in his camp he knew I was screwin up and rushed over to save me from disaster We had a fun chat. For sure put an over flow tank on and make sure it works properly so you don't get air in the system.

LoL thats funny. I will just use my old oil tank. Thanks for the Ideal.

 

[BLASTER POWER]

awh nice find goin be a beast when ya have it done

 

[Blaster#55]

Yea cant wait to get it. Sucks its almost winter!