Don't know whats wrong

[BlasterCrazy]

my motor is still boggin out in 6th when you get up to around 7,000-8,000 rpm. I have to plug one 300 main the other is 310 and they both are look right any idea on why i;m bogging out still

 

[chriscblaster]

if its fine on all the other gears, maybe tors. id try a plug chop to make sure jetting is correct

 

[BlasterCrazy]

No TORS and I hate to waste a plug

 

[chriscblaster]

well try cleaning it up really good. failing that, you will have to

 

[super noober]

No TORS and I hate to waste a plug

its not a waste if it tells you what you need to know. right?

 

[chriscblaster]

and you can re use the plug after you do it

 

[BlasterCrazy]

this is what the two plugs look like

 

[chriscblaster]

well if its a waffly brown color after chop its a good jetting, if its a smoky grey/white its to lean, if its black its to rich. what ones after chop?

 

[2StrokeBlaster]

well if your blaster is stock then 300 or 310 main jet is to big go down a couple jets
but if your plug looks good then like wat chriscblaster said, clean it up man

 

[BlasterCrazy]

No none of them was after a chop what I've read to true way to do a plug chop cut 3mm up on the threads and look inner part of the plug and look for a dark brown ring

 

[2StrokeBlaster]

well to plug chop, you get it warmed up and get it going as fast as it can wide open for a couple blocks and then kill it. check the color of the center piece of the plug where the little nipple comes out
if its brown/darkbrown then its fine
if its gray to white then its too lean
black=to rich

 

[ckjohneh]

hate to waste a plug, they cost 3 bucks

 

[burnin'_oil_2001]

hate to waste a plug, they cost 3 bucks

me too, check out these links:

- Harbor Freight Tools - Quality Tools at the Lowest Prices

spark plug cleaner, great deals on eBay Motors, Home Garden on eBay!

this is what I am going to get. besides it does not hurt to have a couple of extra plugs around.