Does anything look bent on this picture

[Gsi-mark]

As above my right wheel as u look at quad is catching on nerf bars

 

[Awk08]

kinda dark in there, get it outside in the day light to get a better pic ?
possibly a slight tweak circled, it is a common spot for these frames to bend, i've done 2 of them myself.
try to measure ? or possibly cut a cardboard template to prefectly match the other side, then flip it to compare to the other ?

 

[Blaaster]

Taking a straight line from the rear swing arm, the frame does seem to pitch off towards the right, just above where the front of the nerfs attach.

The end of the right A arm is definatly lower than the left one.

To me the frame looks out of alignment about where the exhaust pipe goes accross.

 

[Gsi-mark]

Wots best way of getting clearance on nerf bar

 

[89blaster89]

yep looks bent were awk circled

 

[luk3x3]

where awk circled looks like theres either less of a bend then on the left side, or more..

not sure, it looks kind of straighter then the left.

 

[Awk08]

Wots best way of getting clearance on nerf bar

swap everything onto an unbent frame

 

[Triple_B]

Exactly where mine is bent.

 

[itstyler]

Looks bent to me, if your anywhere near michigan you can come see me and get a free oneI:I