Dmc alien

Budget_Blaster

New Member
Dec 25, 2009
1,630
13
0
Illinois
Hey quick question i went to order the toomey t6 for my banshee but the place is sold out but have the DMC alien setup is it any good on the banshee?They also have the sst and fatty setups as well as pro circuit.They also say they have the alien 916 which is a 2-1 setup which of these is the best setup?

Thanks.
 
What about the T5 setup?

I do all types of riding from trail riding to country cruising back roads and anything in between.

The motor is STD bore 64mm resleeved,boysens,stock jetted carbs,and so on yada yada yada basically a total bolt on banshee so i want my pipe to come on from idle to redline i know impossible on a two stroke but id like it to be broad.

Of the exhausts they have im considering the DMC alien or the TOOMEY T5 which of those two is a better all around exhaust?
 
toomey is going to be beter than the dmc. if you are going to run stock porting the T6 is works a little better than the T5. if you plan on porting in the future then the T5 is what you want. a close 2nd to toomey would be the pro circuits.
 
If the search on BHQ worked as good as on BF I'd get you a better answer. T6 are primaily for unported, tho a good porter can work with them. Makes a good power spread low to mid. T5 works best on mild ported but works on unported, very simular to T6. DMC is also good all around pipe and the single silencer sounds AWSOME I:I (check U tube). Also consider FMF fatty or gnarly.

My son has FMF golds on unported 4mil with head spacer, which in effect LOWERS ports. Makes for a very tractable powerband (almost 4 stroke like) but still pulls good. I:I Hope this helps. :D

BTW, couldn't find your a$$ with both hands with search on BHQ X(
 
2:1 anything on a Banshee = FAIL. Only practical app for it is for turbo. The 916 is a 2 in 2 out silencer. Some actually do consider sound above or equal I guess :o
 
I liked the FMF Fatty's on my Banshee....decent low end with a nice hit in the middle. They did well for trail riding. Ive never run the DMC pipes on a Shee, but the 916 setup is pretty cool...