Diy Rear brake

[faster]

Ive got an old blaster with a cable rear brake i was thinking of useing a small hydralic lever and caliper i have! I was wondering if any one had fabricated a plate to do this on how id make the linkage to foot pedal to brake resivoir. any pics of a standard brake would be good or if you have made one then get some pics up.... please

 

[01blasterdude]

If you have a welder, or access to one, then adding some meat onto the back of the pedal, and drilling a hole were you need to bolt the master cylinder to, works great. Ive got some pics of mine, Ill see If I can post them in a little bit.

You can kinda see the pedal in the pic, but it will give you an idea.