cylinder

[hickskateboarder]

anyone have a good stock cylinder lyin around? i'd like to try my hand at port & polishin, but dont' want to screw mine up. might be interested in a piston and head too. lemme know

 

[flyers42091]

I can probably hook you up with a cylinder and a head. Ive got a few sets laying around, but they all need to be bored. pm me if your interested.

 

[hickskateboarder]

hmm...

well, i'd kinda like to have one that could go without being bored.... how bad are they?

 

[flyers42091]

The cylinders are jugs on the inside of the cylinder. You might be able to just hone, but i doubt it. The heads are fine, little rust on the outside but the domes are in good shape.

 

[hickskateboarder]

wah?

so do you have a cylinder (entire jug) or just sleeves? i'm confused. i need a jug for porting purposes. and maybe piston and head

 

[flyers42091]

Its the entire jug, but the inside of the cylinder is rusty cause the last person that had it left it outdoors. So with a fresh bore it would work fine. I have a head i can sell you, but no pistons that are any good.

 

[yamaha4life]

id be intrested in a set head/jug if you could work with me

 

[flyers42091]

pm me an offer.