alright i wana clean my oil glass but im not to sure on how to do it so some help would be nice iv rebuilt it stuff like that but havent messed with the crankcase gota start some where i guess rep will be given for help thanks
crankcase
- Thread starter hudack
- Start date
Just remove the clutch cover and clean the inside out. You may want to think about changing clutch plates while you're in there.
Yeah its real easy, it will wipe nice and clean.... You dont want to go judging your oil level by that window though....
If you think it might be low then change it with some fresh oil anyhow.... Those sight glasses are a crappy judge of how much oil is in there, better to be safe then sorry!!
But yeah like Ken said, take the cover off and clean the glass from the inside and it will shine right up...
If you think it might be low then change it with some fresh oil anyhow.... Those sight glasses are a crappy judge of how much oil is in there, better to be safe then sorry!!
But yeah like Ken said, take the cover off and clean the glass from the inside and it will shine right up...
the oils freshly changed just figured might as well clean it some while i cant ride the dam thing when ever it stalls it wont start for 2 or 3 hours so idk its just pissing me off cant complain tho paid 800 for it and this is the first real problem ive had with it
Yeah only prob. is you would loose the fresh oil to clean the glass.... I know the feeling, just find something else to clean if your bored LOL....
I know the feeling ive waited forever to fix mine, im just out the $50 i need for another carb cap and rebuild kit, so im just waiting for the cash :-(
Find something worth painting if your real bored
I know the feeling ive waited forever to fix mine, im just out the $50 i need for another carb cap and rebuild kit, so im just waiting for the cash :-(
Find something worth painting if your real bored
Is it overheating and needs to cool down between starts? Maybe you have an air leak somewhere? Just guessing blindly
its not over heating i had it out allmost all day and ran pefect dont think it ever ran so good lol and then i was blowing a couple dounuts and the i went to pull out forgot it was in third dumb mistake lol and then it stalled and wouldnt start wanted to check my jeting by doing a plug chop so i started it and was warming it up and i turn it off for a min started again and then it was runing and staled and now it wont start so im tryig to find something to do i could take it to cernics but im gana just keep gueesing at the small things cuz they charge like 60 and hour and i like fixing my stuff just cause its mine lol
Similar threads
