Correct Exhaust parts

[recruiter101st]

Ok I am new here.
I am about to purchase an FMF Fatty head pipe, I have an FMF Powercore 2 coming. What all peice do I need to connect these? The springs I was told I can get from the hardware store, but what about O rings and the Peice that connects head pipe and silencer? What size o rings? what size connector?

 

[recruiter101st]

Nobody has input here? Im trying to run my bike this weekend, Wonder what I can find thats going to work

 

[Demo4o1]

u will also need the coupler pictured on the bottom and FMF i dont THINK sells them separately. that SUCKS. the turbinecore2 pipe ure getting make sure its NOT a SST model because it will be too long for the FMF im sending u. btw glad i had this pic from before. the spring u will need a 55mm

 

[Demo4o1]

u can use ur stock exhaust coupler and BTW when u put this exhaust on make sure u REJET! stock jet is 230. u will need to go 260 and work ur way down. depending on what mods u have. if its all stock get a 240, 250 and maybe a 260 but i ran 250 with just the exhaust and it was fine. buy ur jets from jetsrus.com

 

[recruiter101st]

Ok So I will go buy some High Temp Sealant. re-use my stock coupler, Get a spring from the hardware store. Will i need the Flange pictured? I thought the Pipe you are sending me comes with a flange

 

[Demo4o1]

yes it comes with the flange. but no spring or coupler. all u will need is the high heat red silicone. re use ur stock coupler which im sure should fit. then rejet. oh and as for the stock o ring depending how bad it looks i guess u could use it. u could also use ur stock flange too i believe

 

[recruiter101st]

Awesome Thanks!