does anyone have any cheap ideas how to connect kehin flat slide to stock air box? I heard you could do it with pvc and rubber adapter , has anyone done anything like this?if so what do i need to get . i live right across the street from hardware store! just a thought!
connecting kehin flat slide to stock air box
- Thread starter blasterbandit2
- Start date
yeah get an 1 1/2 fernco and you'll have to play around with pipe and fittings to go around the shock and meet the carb.
if you want a hack job you can cut the rubber boot back to where it is just big enough to fit over a chunk of 1 1/2 pvc, hose clamp it on, then fernco the other side of the pipe to the carb. paint the pipe black and it may not come out looking too bad.
if you want a hack job you can cut the rubber boot back to where it is just big enough to fit over a chunk of 1 1/2 pvc, hose clamp it on, then fernco the other side of the pipe to the carb. paint the pipe black and it may not come out looking too bad.
on the filtter side it's 2-.1/4 inches.how else can you tell what size it is?I think i like the fernco idea that hick skate boarder said. well this morning i got a top end gasket set and was took the jug off and whamscarred piston and cylinder that really sucked . i thought that i was going to get to ride.never rode it yet. but i did find out that it has a hot rods crank in it i guess thats good news.im probably going to bore it out 40 over. looks like i still wont be ridin blaster for a while , just have to ride kdx.
Similar threads
