Clutch problem

[Blaster#55]

I was redoing my clutch and when I took the pushrod out the ball was melted on it. So I went and sanded the ball smooth and put it back in. I put it all back togeather and everything work fine untell I tried to put it in gear and the clutch doesn't allow me to push it while it is in gear with the clutch held. The clutch is really hard to pull in. I'm thinking I need a new pushrod and ball but I dont know if that will fix the problem.
If someone has a spare pushrod ball they want to sell please pm me. I only need the ball because I already have 2 spare pushrods.
Thanks

 

[hickskateboarder]

could it just be an adjustment issue? i know wet clutches never like to disengage 100%...

 

[Blaster#55]

bump

Bump^
Need Help. I want to ride so bad

 

[battbike]

replace the 2 rods and ball and than ajust it, those 3 parts are cheep

 

[Blaster#55]

replace the 2 rods and ball and than ajust it, those 3 parts are cheep

Do you know where I can get them?

 

[peacher213]

try online, or call a yamaha shop...they can order them if you cant get them anywhere else.

 

[Blaster#55]

Is the clutch suppose to be hard to turn when you pull in the cutch. When I go to turn the presure plate it wont budge it just turns the hole basket. Then When I put the clutches in dry with out oil it turns easy. Is it suppose to do that?

 

[quam]

sounds like you didn't align the dots on the boss and the hub....

 

[blaster240R]

clutch

hey blaster55, i just joined the forum yesterday and found this thread. i have a 98 blaster with a 240 big bore and i had the exact thing happen to me only i lost the use of my clutch completely. I went to my local yamaha dealer and bought a new rod and ball and problerm fixed hope it helps.

 

[xjma]

if you don't live a reasonable driving distance from a dealership, try www.bikebandit.com

 

[Blaster#55]

Thanks for all the help.