i bought a blaster from a friend and when i went to adjust the clutch i see the mark on the case was gone due to the chain falling off an taking half the nipple where the spring an mark is. does anyone have a picture of the mark so i can least get an idea where its at. i looked in the manual but it dont have a actual pic of the motor. please help it be greatly appreciated.
clutch mark on case gone>help!!!
- Thread starter johnny b
- Start date
its a rectangle shape its like 1/8'' wide by like maybe 1/2'' long.look from the left side of it and you should see it
yeah like half of the rectangle shape deal with the adjustment mark on it is gone. idk why but all i need to know is where the mark is spose to be on there since mines missing.
ah ic. it doesnt make it look like that in the manual. plus i got a what looks like a pointer on the back right side which points at the sprocket of the adjustment lever and in the manual shows off the end of the lever.
thats the pointer you line up with the mark on the case under the carb, ya gotta do all this with the cable disconnected at the hand lever, and the rod unscrewed in the center of the clutch basket, line up the marks, tighten the rod till it just touches, you'll feel it, then tighten the locknut, and connect your cable and take up the slack with the adjuster on the hand lever, thats what the adjuster up there is for, slack, not adjusting the clutch
