carb stuck !! help!!!!!!111

[Drifz1]

hey i took my carb off to see what jets i had but then realised dad had brought the screw drivers to work!! so i put the carb back on and its like the throttles stuck (i know i put it on rong!) but how can i put it on right? thanks

 

[super noober]

i dont understand what the problem is man, all you do is stick it back in the intake manifold and tighten the clamp.

 

[Drifz1]

i dont understand what the problem is man, all you do is stick it back in the intake manifold and tighten the clamp.

sup bro, well i think its the way i put it in (the black thing that you put back in)as it has vents etc can you tell me which way the line that goes the whole way down should be pointin ??thanks

 

[Drifz1]

i dont understand what the problem is man, all you do is stick it back in the intake manifold and tighten the clamp.

sorry i misread ! well the throttle is on about 20% id say (you can tell because the diferent sounds it makes when u kick it with throttle and without! and theres not much movement in the thumb throttle!) so???

 

[super noober]

did you take the slide out and put it in backwards?

 

[Drifz1]

thats why i wanted to know which way it should be facing ! lol thanks man

 

[super noober]

thats why i wanted to know which way it should be facing ! lol thanks man

well if teh way you have it now is wrong then the other way must be right... damn dude use ur head lmao just playin with ya dude

 

[bagds101]

the slide can only go in one way. the slide has a notch that goes into the groove on the carb. make sure the needle goes into the hole in the bottom of the carb. and dont bend the needle trying to force it in.

 

[gearhead04]

well if teh way you have it now is wrong then the other way must be right... Damn dude use ur head lmao just playin with ya dude :d

i:ii:ii:ii:ii:ii:ii:i

 

[Drifz1]

the slide can only go in one way. the slide has a notch that goes into the groove on the carb. make sure the needle goes th into the hole in the bottom of the carb. and dont bend the needle trying to force it in.

what can i do now it wont even start its not at idling throttle as i can hear the kinda muffle sound when i kick it (ehich only happens when i give it throttle)

 

[DirtDiggler]

check that the slide is in the right way , and look down the intake and make sure the needle is going through the passage way into the jet . Can't be anything else other than that

 

[Drifz1]

check that the slide is in the right way , and look down the intake and make sure the needle is going through the passage way into the jet . Can't be anything else other than that

they are thats why im so confussed!

 

[Drifz1]

check that the slide is in the right way , and look down the intake and make sure the needle is going through the passage way into the jet . Can't be anything else other than that

they are,thats why im so confussed!

 

[super noober]

and the carb is fully into the intake?

 

[Drifz1]

yup its fully in

 

[brandoz28]

did you turn the fuel back on?

 

[Drifz1]

k guys i hill started it ! if i come off the throttle for a few seconds it bogs off!(flooding itself maybe??) then i always ferel the exhaust fumes to see if its warm its too hot ??? what the hells rong with it????/ thanks

 

[brandoz28]

how far apart did you take the carb????? did you mess with the air screw?

 

[Drifz1]

how far apart did you take the carb????? did you mess with the air screw?

all i did was open it up to see what jetting i had!!