Ok I just got my first blaster. It is a 2002 I just cleaned the carb and I can't get the top cap to go back on where the throttle needle come through. Please help!!!
Carb problems
- Thread starter Ty kattenbraker
- Start date
make sure the throttle slide notch is aligning with the pin in carb
it has to be aligned
it has to be aligned
Yes I did haha. What is a good kind of 2-stroke carb? I have a stock carb on now and its horrible. Any suggestions?
the stock carb works perfect.
unless you got tons of mods done to your engine
it is not worth it. to touch carb.
you can update the carb a little by removing the big heavy tors brick on top to a
regular cap,with idle screw drilled on the side.
unless you got tons of mods done to your engine
it is not worth it. to touch carb.
you can update the carb a little by removing the big heavy tors brick on top to a
regular cap,with idle screw drilled on the side.
My fourwheeler just started this morning but now it won't start. I cleaned the carb checked the plug. What else?
get a new ngk b8es plug.
check compression
free flowing gas from tank to carb
reeds
spark
timing=woodruff key
tors
there is tons of threads on here about this no start condition
it is easier to do a search on your web browser sometimes.As long as you type in yamaha blaster in your sentence
check compression
free flowing gas from tank to carb
reeds
spark
timing=woodruff key
tors
there is tons of threads on here about this no start condition
it is easier to do a search on your web browser sometimes.As long as you type in yamaha blaster in your sentence
Similar threads
