carb pouring gas

[roadkill]

i finally got my blaster today and whenever i turn on the gas it pours out the over flow should i adjust the float and if so how far

 

[245stroker]

take a screwdriver and tap the carb bowl a couple of times. Sometimes the float will stick and a couple good taps can free it up. If that doesn't work then you may have to adjust the float level but it won't take much.

 

[CC&Fabb]

It could just need a clean as well. Also, if you have carb larger than stock and you have it tilted too far it will dump gas out of the bowl.

 

[nofxfan125]

Usually it just needs a good cleaning in my experience.

 

[blasterfreek30]

sounds like a clogged float needle and seat

 

[roadkill]

ok thanks ill try that today and let you know how its working

 

[roadkill]

ok i adjusted the float and it works perfect thanks a lot!

 

[xJust_Causex]

Mine does that as well, but only when its not running. Just have to remember to shut the fuel off when you let it set.

 

[wreckedchevy]

mine just did that to me tapping didn't work just pulled float/needle off sprayed it down with some carb cleaner reinstalled and it's been fine