Can you guess which one is stock?

[Awk08]

i'm gonna say this rad valve's intake tube has to put the carb at the same height and angle as all cr's require, which may take some ingenuity to work with our stuff ???
sumthin to look out before you go grinding on this thing

 

[1bad442]

pm nobber i rember him saying his rad valve sucked for top end power till he ported it but that was also a stock blaster valve not a cr 125 like yours. either way im no porting pro so i couldnt really say if that would help or hurt it

 

[acezeesawtooth]

^^^ i did thanks

 

[acezeesawtooth]

i'm gonna say this rad valve's intake tube has to put the carb at the same height and angle as all cr's require, which may take some ingenuity to work with our stuff ???
sumthin to look out before you go grinding on this thing

im gonna practice all of it on my stock jug first and see how it works out. then move onto my 240

 

[acezeesawtooth]

i'm gonna say this rad valve's intake tube has to put the carb at the same height and angle as all cr's require, which may take some ingenuity to work with our stuff ???
sumthin to look out before you go grinding on this thing

well if worse comes to worse ill just sell that rad valve intake and buy a larger blaster one. the only problem i really see is the angle coming out is pretty sharp but other than that it looks like it should only raise it 1/2" or so not to bad. i think ill have to fix the air box side. but no biggy i have to mod it to fit the 35mm carb anyways

 

[N8tsNastyBlasty]

wow im slow to notice this is one solid unit without a rubber boot at all. probably easier to fit a carb in place with a custom coupler of some sort. will be interesting to see.

 

[acezeesawtooth]

wow im slow to notice this is one solid unit without a rubber boot at all. probably easier to fit a carb in place with a custom coupler of some sort. will be interesting to see.

yeah its a boyesen rad valve thats how them come.

 

[con8quest6]

Anyone know if la kit is shipping yet.. They are the cats meow in top ends and this comes from several builders?? I need one too.

Nope they just keep saying it won't be anytime soon...you could always order it and save your spot in line to get one.. They don't charge your card until they have it ready to ship out. They said a lot of people are wanting them...what a log wait.

 

[Awk08]

siliconintakes.com for adapter boots in any angle and bend

 

[CHutzell]

get us some dimensions on that RAD reedblock,i think the vf3 cr125s are larger then the standard cr125s.

 

[1bad442]

Nope they just keep saying it won't be anytime soon...you could always order it and save your spot in line to get one.. They don't charge your card until they have it ready to ship out. They said a lot of people are wanting them...what a log wait.

yep id order it now if u want one as they dont charge your card till they ship it and from what i hear quite a few people have allready done so

 

[acezeesawtooth]

well i started porting the rad valve today. i got one side done it just needs touched up ill post some pics so you can see how much i took off.

i still have the sides of the intake to port out and the sides of the cage to take in but here is how she stands right now

 

[1bad442]

looks good, well need an ass dyno report when ur done lol

 

[acezeesawtooth]

oh i hope this thing is screamin fast when im done (just wish i had money for a stroker) yeah it opened a ton inside there

 

[Awk08]

noobs will be proud of ya !!!!!!!!

 

[acezeesawtooth]

I hope to port the other side and clean them all up tomorrow. Then I'm gonna smooth and Polish the inside for better flow through it. I'm also gonna Polish the whole cage shouldn't take long

 

[1bad442]

I hope to port the other side and clean them all up tomorrow. Then I'm gonna smooth and Polish the inside for better flow through it. I'm also gonna Polish the whole cage shouldn't take long

dont smooth and polish it u want it semi rough so it atomizes the gas better

 

[acezeesawtooth]

dont smooth and polish it u want it semi rough so it atomizes the gas better

I meant smooth out the lines I left from the carbide bit with a dremmel stone. I'm polishing the outside around the intake boot and such

 

[super noober]

noobs will be proud of ya !!!!!!!!

haha , looking good man, cant wait to hear the ride report I:I

 

[slickerthanyou]

Looks good. I thought about doing the same thing to the new blaster Rad valve i got.

But I want to run it before I do any work to it then I have something to compare other than the vforce2 I had.