with no reprocution? also i put yamalube 10w40 in my tranny i'm reading thats not good will it matter for a couple weeks or should i just change it?
can i switch from yamalube to klotz?
- Thread starter almightythor
- Start date
I use gear saver 75W in the tranny, although I think the manual calls for 80 weight. As far as Benol goes, that's all I use. It's a castor oil and yamalube is not. Klotz is much better than yamalube.
Members do not put heavy weight oil in the trans, it robs power.....
Replace it with automatic trans fluid, you will pick up power
Replace it with automatic trans fluid, you will pick up power
my service manual recommends 10w-30 oil for the tranny/clutch. It should NOT have any energy savers in it.
So how you say not to use a heavy weight, does that mean use gear saver 80wt, or 10w-30 like the manual says?
Doesn't automatic transmission fluid have energy savers in it? If so you don't want to use that. It will damage the clutch.
Thanks
What the hell is energy savers? What do you think is in an automatic transmission? Clutches!!
The best stuff for a wet clutch 2 stroke is Amsoil Super Shift ATF 10w Ask any of the Pro MX teams.
10W30 penzoil...never had a problem..run the sh*t outta it..replace clutch pack once in 3 yrs but that was due to rooky learning a burn out..
Similar threads
