Bunch of problems on this 4 wheeler!

[Blaster200boy]

Good news guys! I just sold the Blaster to my grandpa for $750 and he told me he was gonna takwe it out to Arizona to his condo. He also told me he was gonna take the 1989 Yamaha Moto4 200. But I told him there are a couple things wrong with it and it would neeed a little money to get it running back to normal. first off, I would like to know if I could put a better carb on it. One that has the choke located ON the carb and not a cable like the one on it. The one on it right now is a Mikuni VM22SH. I would rather just get a new carb than to rebuild this one because i need a choke cable, throttle cable and new jets, gaskets, and needle. It is all messed up from sitting in the cold...

 

[Surfrjag]

does this help?
YAMAHA YFM-200 MOTO 4 - 1986-1989 - CARBURETOR ASSY.: eBay Motors (item 260656638638 end time Nov-25-10 11:12:07 PST)

 

[Blaster200boy]

does this help?
YAMAHA YFM-200 MOTO 4 - 1986-1989 - CARBURETOR ASSY.: eBay Motors (item 260656638638 end time Nov-25-10 11:12:07 PST)

I'd prefer if I could get a carb to have a choke on the side of the carb.

 

[phragle]

If you find a bike carb with the chock on the slide, I would love to see a pik of it.

 

[Blaster200boy]

If you find a bike carb with the chock on the slide, I would love to see a pik of it.

I meant to say "side" not "slide" sorry....

 

[Surfrjag]

call carb parts warhouse i bet they can tell you and u can order it all in one phonecall
yours is a makuni vm22 26 mm but this should work might.
KEIHIN PWK 28MM CARB - Pit Bike Engine Parts - CARBS and JETS - KEIHIN PWK 28MM CARB - TBolt USA, LLC

 

[brandoz28]

i wouldn't go much above 24mm or its gonna be a dog.

 

[sheeblast]

call carb parts warhouse i bet they can tell you and u can order it all in one phonecall
yours is a makuni vm22 26 mm but this should work might.
KEIHIN PWK 28MM CARB - Pit Bike Engine Parts - CARBS and JETS - KEIHIN PWK 28MM CARB - TBolt USA, LLC

2 stroke carbs and 4 stroke carbs are not the same. they are different.

 

[Blaster200boy]

Let me go get a photo of this carb to tell you what im alking about!

 

[Surfrjag]

why does it say ...
PWK28mm Carb in stock. Kit comes complete with carb and stronger spring for 4 stroke use

this carb comes with a NAPE needle that works well with 4 strokes

im just going by what it says...

 

[brandoz28]

i know what they look like and they're ugly lol.



it'll be a lot less trouble to just rebuild the one you have IMO

 

[Blaster200boy]

Just took those pisctures. The last picture is off the choke cable assemly.

 

[sheeblast]

ya it is a wire that goes upto the handlebars correct?

 

[Blaster200boy]

ya it is a wire that goes upto the handlebars correct?

It aint a wire, but its a cable.

 

[sheeblast]

try this carb maybe
Mikuni 22mm Carb - Pit Bike Engine Parts - CARBS and JETS - Mikuni 22mm Carb - TBolt USA, LLC

 

[sheeblast]

It aint a wire, but its a cable.

isn't a cable just strands of wire?

 

[Blaster200boy]

isn't a cable just strands of wire?

ya. whatever. i just want some answers. no fights over stupid sh*t

 

[brandoz28]

i'd get that carb, and then the cables to make it work well


that has electric start right? why wouldn't you want all the controls at the bars?

 

[Blaster200boy]

i'd get that carb, and then the cables to make it work well


that has electric start right? why wouldn't you want all the controls at the bars?

I am just gonna clean it out really well, throw a new plug in it, and change the oil. Only thing im confused about is last time I rode it was full of oil and then now it has absolutely nothing. I looked at the plug and it was gunked up and was black. I said its got bad rings and my gpa said its from sitting. looks like I may be right if rebuilding the motor if the carb dont solve the problem (;