Budget Friendly Mod Ideas

[BGATZ]

looking to increase so speed or power

current setup:
full Toomey Pipe
Port and polished
bored 1 mil over
K&N airflter
jetted
stock sprocket sizes
v force 3 reeds
banshee hubs with Itp Holeshot HD 20-11-9

anything in mind tho get some more brapppppp

was thinking a KOC lightened flywheel any suggestions

 

[blasterBruce]

You Mean KOR Flywheel , but your on the right track , Could advance your timing 4 degrees , Also Think about a Bigger carb ?

 

[BGATZ]

yea KOR lol
what would a bigger carb do for me and what size would u recommend

 

[blasterBruce]

Well I can't give you any Real recommendation because I've only used a Stock size carb

 

[Blaaster]

A rechambered head will give some improvment in power.

The + deg advance gives no more power but moves it down to come in at a lower rev.

Lightening the flywheel will give it more Braaaap at the espense of holding revs on load.

Unfortunatly you cant have both speed and power you have to choose.

Sprocket changes should be considered, if you are able to mod for more power then you will be able to run a higher gearing to achive more speed.

Unless you have a BBK and wild porting a 28mm carb should serve you well.