Hey guys. I am working on rebuilding a blaster that was missing a few parts but luckily I have enough parts to open a store! I was looking at the brakes and noticed that there should be a small barrel shaped thing on the foot lever for the cable to connect to so the lever can pull it but it is missing. I have looked everywhere and cannot find one. Is there any cheap fix for this because I cannot find anything online about it. Thanks!
Brake cable holder/barrel on foot peg
- Thread starter stevensj13
- Start date
if you plan on running the stock cable, that doubles as the parking brake ???
you will need a stock barrel, that allows the pedal or the parking brake lever on the bars to operate the caliper
i have one of these barrels, just saw it layin in a parts box, yours for the asking, just pm me your addy
if your going to be using just a shorty cable that only goes from the pedal to caliper, they come with a replacement barrel specific for the shorty's
you will need a stock barrel, that allows the pedal or the parking brake lever on the bars to operate the caliper
i have one of these barrels, just saw it layin in a parts box, yours for the asking, just pm me your addy
if your going to be using just a shorty cable that only goes from the pedal to caliper, they come with a replacement barrel specific for the shorty's
