blaster running issue

how do I remove tors system?

  • dont know whats wrong with my blaster it wont stay running it just starts and bogs right out without

    Votes: 0 0.0%
  • hitting the throttle what do I do?

    Votes: 0 0.0%

  • Total voters
    0
  • Poll closed .

blasterked01

New Member
Nov 13, 2014
2
0
2
29
Hey guys I just got a blaster and have been riding it until today, I went to start it and it would fire once in awhile and stall out without hitting the gas, I cleaned the carb and put freah gas in it and tried it again and got no luck, could the tors system be interferring with it staying running? Any advice would be awesome thanks guys
 
Do you have a strong spark?
Did you clean all the little passage ways and jets on the carb?

set air screw to 1.5 turns out
leak test

does it run if you keep on the throttle a little bit?
 
Have you done anything different today than any other day? say used old gas you had lying around, gave it a wash, went through some deep water, when you last rode it ran well ?? Check and see you have good fuel flow from the tank. disconnect fuel line at carb and you should have a steady fuel flow. If flow is good than crack float bowl screw and see if you have fuel flowing well to the bowl. Check the reeds. you may need to pull carb and clean jets. Check that you have a good blue spark.
 
year calculater pic plus ex1 1 1.jpg