Well I just pulled my head off and sent it out to Ken at 12pm today and am so excited to see the results. Any ideas of what I should expect and do when I get it?Whats the compression, squish measurement, and combustion chamber CC's ?
If you didn't shoot for proven #'s on those, let a professional do it...
http://kenoconnorracing.com/ns/pricing
3.30$!!!!! It was around 2.11$ here in fairmont West Virginia the other daySorry SlyDog, I haven’t logged in for a while. I am planning to port when I have to throw a top end in it. My only mods are Boyesen Super Stock Reeds, and the air lid. I’m iffy on the Air lid, I already a 1 size bigger jet so I might be good. I called Ken and he said 93 octane, no less. It’s around $3.30 per gallon here for that plus the oil which around 15 bucks for sixteen ounces. That’s over 30 bucks for just 5 gallons!!
It will be alittle less $ because 32 :1 is 4oz per gallon so your 16oz. Of oil is good for 4 gallons.see cheaper than you thoughtSorry SlyDog, I haven’t logged in for a while. I am planning to port when I have to throw a top end in it. My only mods are Boyesen Super Stock Reeds, and the air lid. I’m iffy on the Air lid, I already a 1 size bigger jet so I might be good. I called Ken and he said 93 octane, no less. It’s around $3.30 per gallon here for that plus the oil which around 15 bucks for sixteen ounces. That’s over 30 bucks for just 5 gallons!!
Probably a couple horses, biggest increase will be torque across the powerbandWell I just pulled my head off and sent it out to Ken at 12pm today and am so excited to see the results. Any ideas of what I should expect and do when I get it?
Just tourqe it correctly. And retouqe after.Well I just pulled my head off and sent it out to Ken at 12pm today and am so excited to see the results. Any ideas of what I should expect and do when I get it?
OkJust tourqe it correctly. And retouqe after.
Usually after its been hot and cooled down.or a short rideThanks guys. So would I do heat cycles then retorque because I have to take my stock pipe off to get to them bolts.