Whats the purpose of this it doesnt make my part do anything different it fits tight with no play. Only thing i could see is to somewhat strengthen the shift lever but is still pointless i guess. It looks like that helped hold the freaksaver on. If you put that much force on your shift lever to need more strength id add a gusset to the frame thats how my blaster is.
Does anyone know if the screws above and below the sprocket in the previous pic just hold the plastic on
Look forward to some feedback
hal, I noticed your swingarm bolt hole is f**cked up. You need to get that sh*t trued up son.......
where did you find this pic I only ever was able to find the one thats on a green blaster and did not include that bottom earhere is what i am saying about going around the shifter shaft.... see picture below.
where did you find this pic I only ever was able to find the one thats on a green blaster and did not include that bottom ear
the way jeeps case saver is, the chain is completely surrounded by it, there is no need for it to go around the shift shaft, as the chain will never reach it, even if it does come off the gear
at least thats what i'm seeing
Found bolts. 3 80mm long bolts or screws are going to work for the long ones and a 10 mm will b good for the shortone 6mm 1.0 pitch bolts