Everything is stock besides pipe and air box delete so what jets do i need and what tuning needs done ? Ive heard the pilot dont need changed ive heard the needle dont need adjusted just a main jet so which one?
Bills pipe and air box delete help!!
- Thread starter Cmelrose84
- Start date
Sry guess i should been more specific i drilled holes in airbox lid and lined with mesh to keep debri out it has a uni filter and as far as pipe i dont know the model i bought it off a guy for 50 bucks this is my first bike it runs ok now ive done alot of reading on here and have tore apart and cleaned the carb i disconnected tors from the handle under the front plastic and unplugged from the carb but that giant pc is still connected for idle screw at this point im in central ohio bike has a 230 main did compression test still need do a leak down heres some pics of new plug after a 2mile ride
Attachments
When u get a chance can u check out my pics and share some light on what i should do now ive got my leak tester almost done will that guage work? And can u tell me how to preform the test correctly once i get the pvc piece for the intake ill do the test im very adiment of having a good running bike and im constantly reading everything i can about it thanks
The gauge isn't accurate enough, only needs to go up to 20lbs or so. You only apply 6-7lbs pressure. So you have to be able to easily see a half pound drop.
Reeds look OK, but I can't see if they are sealing tight. Specs only allow a few thousand gap.
Might have to search around for jetting info, remember start big and work your way down.
Read up on how to do a proper plug chop.
Reeds look OK, but I can't see if they are sealing tight. Specs only allow a few thousand gap.
Might have to search around for jetting info, remember start big and work your way down.
Read up on how to do a proper plug chop.
I personally think that pressure gague isnt in small enough incrememnts for you to get the right reading. Just from looking, the guage wont even reach the firt mark before you need to stop! Find a guage with smaller numbers on it so you dont put 30 PSI into it accidently lol
Thanks i thought that about the gauge i went to lowes home depot and there all the same i may need go online i guess and yes im going to plug chop once i get my new jets thanks
Only jetting specs I found were in the pipe shootout thread, buried in the text, and reading it on this tablet is not easy.
Do u have the link? I wonder what model pipe and silencer i have ? I was thinking a 270 thru 300 jet should suffice and just keep plug chopping if i could just find a damn air gage for the leak tester ive tried everywhere lowes home depot autozone and nothing
